Luke

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • November 2, 2019 at 1:13 pm #32424
    Luke
    Participant

    Thanks Luke, with your advice in mind, I will have another go at customizing  MOGS. Thanks for the input.

     

    November 2, 2019 at 1:13 pm #25931
    Luke
    Participant

    Thanks Luke, with your advice in mind, I will have another go at customizing  MOGS. Thanks for the input.

     

    November 1, 2019 at 12:46 pm #25927
    Luke
    Participant

    “I am having a problem with resizing a drawing in layout. I made a detail drawing in Sketchup’s DRAFT mode and exported it to Layout, I dragged the drawing over from scrapbook to my page but when I resize it, the drawing disappears. What’s happening here and how can I remedy the situation?”

    I solved this by updating the drawing reference in Layouts preferences. I was then able to resize with no problem.

    My question about making my own MOG elements is still to be answered. Does anyone have experience doing this?

    Luke

    November 1, 2019 at 12:46 pm #32418
    Luke
    Participant

    “I am having a problem with resizing a drawing in layout. I made a detail drawing in Sketchup’s DRAFT mode and exported it to Layout, I dragged the drawing over from scrapbook to my page but when I resize it, the drawing disappears. What’s happening here and how can I remedy the situation?”

    I solved this by updating the drawing reference in Layouts preferences. I was then able to resize with no problem.

    My question about making my own MOG elements is still to be answered. Does anyone have experience doing this?

    Luke

    September 21, 2018 at 6:49 pm #18488
    Luke
    Participant

    Hi There,

    I am taking the SUFP and am trying to create a scene with the ConDoc perspective tool. I did as Mike suggested and set the configurator’s Interior and exterior Perspective  setting to “Design” and it worked on a simple model of my own without crashing, but with the perspective that you set up in SUFP 8.5 Master suite the model crashes. All the settings are as you have them in the class and the configurator is set to “Design” for both interior and exterior perspectives. What can I do to rectify this?

     

    Thanks,

    Luke

    September 21, 2018 at 6:49 pm #32029
    Luke
    Participant

    Hi There,

    I am taking the SUFP and am trying to create a scene with the ConDoc perspective tool. I did as Mike suggested and set the configurator’s Interior and exterior Perspective  setting to “Design” and it worked on a simple model of my own without crashing, but with the perspective that you set up in SUFP 8.5 Master suite the model crashes. All the settings are as you have them in the class and the configurator is set to “Design” for both interior and exterior perspectives. What can I do to rectify this?

     

    Thanks,

    Luke

    September 13, 2018 at 12:35 pm #18342
    Luke
    Participant

    So Mike, If Sketchup crashes  when I use the default setting (LINE DRAWING-Presentation) what can I do to alter that should I need that setting in the future? Also should I be setting the configurator to DESIGN throughout?

     

    Thanks,

    Luke

    September 13, 2018 at 12:35 pm #32025
    Luke
    Participant

    So Mike, If Sketchup crashes  when I use the default setting (LINE DRAWING-Presentation) what can I do to alter that should I need that setting in the future? Also should I be setting the configurator to DESIGN throughout?

     

    Thanks,

    Luke

    September 13, 2018 at 12:07 pm #18341
    Luke
    Participant

    That worked Mike, thanks so much!

    September 13, 2018 at 12:07 pm #32024
    Luke
    Participant

    That worked Mike, thanks so much!

    September 12, 2018 at 11:49 pm #18335
    Luke
    Participant

    Hi there,

    I installed ConDoc last week and have been looking through the manual and also taking the SUFP online class. The plugin looks great and I’m excited to use it on my current project, but I’m running into a problem. I constructed a simple model -203KB, I set up a perspective I like, select the ConDoc perspective tool, click on my model view and the “pick drawing for this scene” dialog box appears, I press exterior perspective, and Sketchup crashes. Every time. It’s also the only model I have open.

    I’m working on a Macbook pro 16GB.

    Please help.

    Thanks,

    Luke

     

    September 12, 2018 at 11:49 pm #32022
    Luke
    Participant

    Hi there,

    I installed ConDoc last week and have been looking through the manual and also taking the SUFP online class. The plugin looks great and I’m excited to use it on my current project, but I’m running into a problem. I constructed a simple model -203KB, I set up a perspective I like, select the ConDoc perspective tool, click on my model view and the “pick drawing for this scene” dialog box appears, I press exterior perspective, and Sketchup crashes. Every time. It’s also the only model I have open.

    I’m working on a Macbook pro 16GB.

    Please help.

    Thanks,

    Luke

     

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)