Condoc 5.2: Incorrect representation of Condoc Drawing in Layout

00_Home 00_Pro Forum ConDoc 5 Condoc 5.2: Incorrect representation of Condoc Drawing in Layout

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #34778
    [email protected]
    Participant

    Hello Condoc Team, hello Mike,

    when I submit a layout drawing, it displays correctly in the ConDoc drawing scrapbook. When I drag this drawing onto the drawing page, it displays correctly. As soon as I change the size of the group frame, the drawing no longer displays correctly. For example, the hatch 50 fills disappear or the hatches do not display correctly. If I change the size of the group frame a few times, the display becomes correct again, but usually not at the desired size of the group frame. I turned the graphics engine on and off. It does not change anything.

    What do i have to do? Thank you for your support.

    Best regards,

    Nicole

     

    #34779
    Ruben Benitez
    Participant

    Nicole ….. I’ve seen this behavior before and closing and opening of the layout file usually fixes that. Updating the reference will fix this as well. You’re not doing anything wrong, it’s just an undesired Sketchup quirk.  I’ve gotten into the habit of opening my Sketchup file from my layout file by double clicking into the ConDocs scene group, right clicking on a scene and then selecting open model in Sketchup. I don’t seem to have this issue when I open my Sketchup models like this versus any other way

    #34782
    [email protected]
    Participant

    Thank you for the quick answer, Ruben!

    I’ve tried your tips one after the other, but unfortunately nothing changes. Only after changing the size of the scene group frame several times will the drawing be displayed correctly. Unfortunately not where I need it.

    During the tests I have now found that it works if I raise the frame to the full height of the drawing template. I can reproduce that too.

    Do you have any other thoughts as to why that is? I would be grateful for a solution.

    Best regards,

    Nicole.

    #34783
    [email protected]
    Participant

    Hello Ruben, hello Mike,

    I have now found that it only works if there is enough space between the drawing and the frame of the scene group. Can this be ?  This would limit the number of scene groups on the sheet because you cannot place the scene groups close together.  Can I influence that? I ask for a hint. Thank you an best regards,

    Nicole

    #34786
    Ruben Benitez
    Participant

    Nicole …… send me a copy of your model, layout and condocs drawing file and I’ll take a look at it and see what I can come up with
    [email protected]

    #34787
    [email protected]
    Participant

    Thank you Ruben for your help. I’ll test other drawings and send you the files as soon as I get around to it.

    Best regards

    Nicole

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.