Forum Replies Created
-
AuthorPosts
-
October 8, 2021 at 5:50 am #32803ARKADIUSZ MŁYNARCZYKParticipant
Is there any reason why the insterted drawing appears as unrendered? Is it normal and I should live with it or something’s actually wrong?
October 8, 2021 at 5:50 am #27507ARKADIUSZ MŁYNARCZYKParticipantIs there any reason why the insterted drawing appears as unrendered? Is it normal and I should live with it or something’s actually wrong?
October 7, 2021 at 5:25 pm #32802ARKADIUSZ MŁYNARCZYKParticipantAnother hint. After I put it from Scrapbooks to the page and it appears as unrendered.
And there are two paths:
When the next step is simpy resizing – there’s a bugsplat
But…
When I first re-render the viewports and then resize everything works fine.
The only thing that bothers me is that it never happened to me in the previous versions.
October 7, 2021 at 5:25 pm #27506ARKADIUSZ MŁYNARCZYKParticipantAnother hint. After I put it from Scrapbooks to the page and it appears as unrendered.
And there are two paths:
When the next step is simpy resizing – there’s a bugsplat
But…
When I first re-render the viewports and then resize everything works fine.
The only thing that bothers me is that it never happened to me in the previous versions.
October 7, 2021 at 4:50 pm #32797ARKADIUSZ MŁYNARCZYKParticipantHere’s the link: https://we.tl/t-s7GgYOHbpD
It’s not super clean yet and I still have to put things on layers, etc. but I just wanted to test the new version and boom… the problem occured.
October 7, 2021 at 4:50 pm #27504ARKADIUSZ MŁYNARCZYKParticipantHere’s the link: https://we.tl/t-s7GgYOHbpD
It’s not super clean yet and I still have to put things on layers, etc. but I just wanted to test the new version and boom… the problem occured.
October 7, 2021 at 4:18 pm #32795ARKADIUSZ MŁYNARCZYKParticipantIn the meantime I figured out that only one viewport causes the problem. It’s the one with Dashed Style with dashes enabled. I just moved from 2019 to 2021 version. Is there something different in dashes presentation in Sketchup or Layout? Should I change some style settings?
October 7, 2021 at 4:18 pm #27502ARKADIUSZ MŁYNARCZYKParticipantIn the meantime I figured out that only one viewport causes the problem. It’s the one with Dashed Style with dashes enabled. I just moved from 2019 to 2021 version. Is there something different in dashes presentation in Sketchup or Layout? Should I change some style settings?
January 2, 2021 at 1:43 am #32716ARKADIUSZ MŁYNARCZYKParticipantI must have misunderstood your previous message. Apologies! Everything is clear now!
Since I got your attention, I will ask one general quedtion.
It’s time to finally switch from SU19 to SU20 or 21. I’ve been absent from the forum and want to catch up with every tutorials you made, Office Hours recordings etc. since I was away to get my head straight before I move on to all of these, from my point of view, unnecessary ‘improvements’ Trimble implemented in 2020 version and it’s updates.
Could you point me in the right direction? Everything I know about ConDoc were from these kind of content on YouTube or ConDoc website but they seem hard to find now. Any links would be appreciated!
Thanks!
January 2, 2021 at 1:43 am #27326ARKADIUSZ MŁYNARCZYKParticipantI must have misunderstood your previous message. Apologies! Everything is clear now!
Since I got your attention, I will ask one general quedtion.
It’s time to finally switch from SU19 to SU20 or 21. I’ve been absent from the forum and want to catch up with every tutorials you made, Office Hours recordings etc. since I was away to get my head straight before I move on to all of these, from my point of view, unnecessary ‘improvements’ Trimble implemented in 2020 version and it’s updates.
Could you point me in the right direction? Everything I know about ConDoc were from these kind of content on YouTube or ConDoc website but they seem hard to find now. Any links would be appreciated!
Thanks!
January 2, 2021 at 12:23 am #27324ARKADIUSZ MŁYNARCZYKParticipantAnd where cen I get the latest version of ConDoc compatible with Sketchup 2019 and and the lastest version compatible with Sketchup 2020?
January 2, 2021 at 12:23 am #32714ARKADIUSZ MŁYNARCZYKParticipantAnd where cen I get the latest version of ConDoc compatible with Sketchup 2019 and and the lastest version compatible with Sketchup 2020?
August 14, 2019 at 7:48 am #25214ARKADIUSZ MŁYNARCZYKParticipantTwo questions regarding that topis:
- Anyone having trouble with Layout export to PDF, should check your Sketchup file if there’s any dimension added inside of it. Seems like that was causing the problem for me.
- The other thing is something that bothers me, but isn’t necesarilly a huge issue: is it absolutely normal that all of the viewports need to be rendered again after the export? Or something is still messed up in my Sketchup/Layout file?
August 14, 2019 at 7:48 am #32341ARKADIUSZ MŁYNARCZYKParticipantTwo questions regarding that topis:
- Anyone having trouble with Layout export to PDF, should check your Sketchup file if there’s any dimension added inside of it. Seems like that was causing the problem for me.
- The other thing is something that bothers me, but isn’t necesarilly a huge issue: is it absolutely normal that all of the viewports need to be rendered again after the export? Or something is still messed up in my Sketchup/Layout file?
July 18, 2019 at 9:10 am #32283ARKADIUSZ MŁYNARCZYKParticipantWell, Luke, I did what you told and deinstalled Condoc. However, Condoc 3.0 is still there even though there’s no trace of it in Sketchup Plugins folder or in Extension Manager.
July 18, 2019 at 9:10 am #24908ARKADIUSZ MŁYNARCZYKParticipantWell, Luke, I did what you told and deinstalled Condoc. However, Condoc 3.0 is still there even though there’s no trace of it in Sketchup Plugins folder or in Extension Manager.
July 18, 2019 at 7:59 am #32282ARKADIUSZ MŁYNARCZYKParticipantThanks!
EDIT: Well, it still seems like it’s 2019 🙂 Won’t open on Layout 2018
July 18, 2019 at 7:59 am #24905ARKADIUSZ MŁYNARCZYKParticipantThanks!
EDIT: Well, it still seems like it’s 2019 🙂 Won’t open on Layout 2018
- This reply was modified 4 years, 9 months ago by ARKADIUSZ MŁYNARCZYK.
July 17, 2019 at 10:08 am #32278ARKADIUSZ MŁYNARCZYKParticipantHi, It’s been a while and I still haven’t recieved the invoice with a proper amount (250$) and my company details. Could you please do something about it? I know I’m being stubborn, but I just really need a proper document 🙂 Mike stopped answering my emails, that’s why I’m posting my request here 🙂
July 17, 2019 at 10:08 am #24897ARKADIUSZ MŁYNARCZYKParticipantHi, It’s been a while and I still haven’t recieved the invoice with a proper amount (250$) and my company details. Could you please do something about it? I know I’m being stubborn, but I just really need a proper document 🙂 Mike stopped answering my emails, that’s why I’m posting my request here 🙂
July 17, 2019 at 10:05 am #32277ARKADIUSZ MŁYNARCZYKParticipantCould you upload it in 2018 version? 🙂
July 17, 2019 at 10:05 am #24896ARKADIUSZ MŁYNARCZYKParticipantCould you upload it in 2018 version? 🙂
June 2, 2019 at 10:06 pm #32207ARKADIUSZ MŁYNARCZYKParticipantAnother question related to Interior Sections. Sometimes there’s a need to use multiple Section Planes. However, it seems that after I add another section plane (for exaple inside Level 0 group) Condoc only sees the main section plane while exporting to Layout. Is there a walkaround, am I doing Something wrong or it’s just another thing that should be added to the queue to improve ConDoc even more? 🙂
June 2, 2019 at 10:06 pm #23962ARKADIUSZ MŁYNARCZYKParticipantAnother question related to Interior Sections. Sometimes there’s a need to use multiple Section Planes. However, it seems that after I add another section plane (for exaple inside Level 0 group) Condoc only sees the main section plane while exporting to Layout. Is there a walkaround, am I doing Something wrong or it’s just another thing that should be added to the queue to improve ConDoc even more? 🙂
June 2, 2019 at 9:57 pm #32206ARKADIUSZ MŁYNARCZYKParticipantHere’s another thing. Well, two exactly. I’ll ask my questions here, beacuse otherwise I would have to create a million of new topics and I don’t want to make a mess.
1. What do you think is the best practice for working on different machines? I mean, sometimes I add a new shortcut on a PC, then fire up my laptop when I’m at home and whooops, I need to add the shortcut again. I saw your trick to keep everything on Dropbox and then just reload a file, but I’m quite forgetful at times and after adding a shortcut, a Layer to my template, a new Symbol in a Scrapbook, etc I won’t export the files needed. I know it’s not a big deal, but after some switches of computers I don’t really know which one is the one that’s storing my latest options.
Do you think it would be good to keep everything on Dropbox and indicate Layout and Sketchup that the Dropbox Folder is the one I want to be the source of all my settings?
2. Can I move my Condoc Drawings and Condoc Annotations Scrapbooks to some other folder or it’s somehow required it should be in a default folder so that everything worked all right? The same question applies to Styles used by Condoc.
June 2, 2019 at 9:57 pm #23961ARKADIUSZ MŁYNARCZYKParticipantHere’s another thing. Well, two exactly. I’ll ask my questions here, beacuse otherwise I would have to create a million of new topics and I don’t want to make a mess.
1. What do you think is the best practice for working on different machines? I mean, sometimes I add a new shortcut on a PC, then fire up my laptop when I’m at home and whooops, I need to add the shortcut again. I saw your trick to keep everything on Dropbox and then just reload a file, but I’m quite forgetful at times and after adding a shortcut, a Layer to my template, a new Symbol in a Scrapbook, etc I won’t export the files needed. I know it’s not a big deal, but after some switches of computers I don’t really know which one is the one that’s storing my latest options.
Do you think it would be good to keep everything on Dropbox and indicate Layout and Sketchup that the Dropbox Folder is the one I want to be the source of all my settings?
2. Can I move my Condoc Drawings and Condoc Annotations Scrapbooks to some other folder or it’s somehow required it should be in a default folder so that everything worked all right? The same question applies to Styles used by Condoc.
June 2, 2019 at 9:22 pm #32205ARKADIUSZ MŁYNARCZYKParticipantOh, I didn’t know that! Thanks! 🙂
June 2, 2019 at 9:22 pm #23958ARKADIUSZ MŁYNARCZYKParticipantOh, I didn’t know that! Thanks! 🙂
-
AuthorPosts